End-to-end testing Best Practices

NOTE: Note: This is a tailored extension of the Best Practices found in the testing guide.

Link a test to its test-case issue

Every test should have a corresponding issue in the Quality Testcases project. It's recommended that you reuse the issue created to plan the test. If one does not already exist you can create the issue yourself. Alternatively, you can run the test in a pipeline that has reporting enabled and the test-case issue reporter will automatically create a new issue.

Whether you create a new test-case issue or one is created automatically, you will need to manually add a testcase RSpec metadata tag. In most cases, a single test will be associated with a single test-case issue (see below for exceptions).

For example:

RSpec.describe 'Stage' do
  describe 'General description of the feature under test' do
    it 'test name', testcase: 'https://gitlab.com/gitlab-org/quality/testcases/-/issues/:issue_id' do
      ...
    end

    it 'another test', testcase: 'https://gitlab.com/gitlab-org/quality/testcases/-/issues/:another_issue_id' do
      ...
    end
  end
end

Exceptions

Most tests are defined by a single line of a spec file, which is why those tests can be linked to a single test-case issue via the testcase tag.

However, some tests don't have a one-to-one relationship between a line of a spec file and a test-case issue. This is because some tests are defined in a way that means a single line is associated with multiple tests, including:

Parallelized tests.
Templated tests.
Tests in shared examples that include more than one example.

In those and similar cases we can't assign a single testcase tag and so we rely on the test-case reporter to programmatically determine the correct test-case issue based on the name and description of the test. In such cases, the test-case reporter will automatically create a test-case issue the first time the test runs, if no issue exists already.

In such a case, if you create the issue yourself or want to reuse an existing issue, you must use this end-to-end test issue template to format the issue description.

To illustrate, there are two tests in the shared examples in qa/specs/features/ee/browser_ui/3_create/repository/restrict_push_protected_branch_spec.rb:

shared_examples 'only user with access pushes and merges' do
  it 'unselected maintainer user fails to push' do
    ...
  end

  it 'selected developer user pushes and merges' do
    ...
  end
end

Consider the following test that includes the shared examples:

RSpec.describe 'Create' do
  describe 'Restricted protected branch push and merge' do
    context 'when only one user is allowed to merge and push to a protected branch' do
      ...
      it_behaves_like 'only user with access pushes and merges'
    end
  end
end

There would be two associated test-case issues, one for each shared example, with the following content:

Test 1:

```markdown
Title: browser_ui/3_create/repository/restrict_push_protected_branch_spec.rb | Create Restricted
protected branch push and merge when only one user is allowed to merge and push to a protected
branch behaves like only user with access pushes and merges selecte...

Description:
### Full description

Create Restricted protected branch push and merge when only one user is allowed to merge and push
to a protected branch behaves like only user with access pushes and merges selected developer user
pushes and merges

### File path

./qa/specs/features/ee/browser_ui/3_create/repository/restrict_push_protected_branch_spec.rb

```

Test 2:

```markdown
Title: browser_ui/3_create/repository/restrict_push_protected_branch_spec.rb | Create Restricted
protected branch push and merge when only one user is allowed to merge and push to a protected
branch behaves like only user with access pushes and merges unselec...

Description:
### Full description

Create Restricted protected branch push and merge when only one user is allowed to merge and push
to a protected branch behaves like only user with access pushes and merges unselected maintainer
user fails to push

### File path

./qa/specs/features/ee/browser_ui/3_create/repository/restrict_push_protected_branch_spec.rb
```

Prefer API over UI

The end-to-end testing framework has the ability to fabricate its resources on a case-by-case basis. Resources should be fabricated via the API wherever possible.

We can save both time and money by fabricating resources that our test will need via the API.

Learn more about resources.

Avoid superfluous expectations

To keep tests lean, it is important that we only test what we need to test.

Ensure that you do not add any expect() statements that are unrelated to what needs to be tested.

For example:

#=> Good
Flow::Login.sign_in
Page::Main::Menu.perform do |menu|
  expect(menu).to be_signed_in
end

#=> Bad
Flow::Login.sign_in(as: user)
Page::Main::Menu.perform do |menu|
  expect(menu).to be_signed_in
  expect(page).to have_content(user.name) #=>  we already validated being signed in. redundant.
  expect(menu).to have_element(:nav_bar) #=> likely unnecessary. already validated in lower-level. test doesn't call for validating this.
end

#=> Good
issue = Resource::Issue.fabricate_via_api! do |issue|
  issue.name = 'issue-name'
end

Project::Issues::Index.perform do |index|
  expect(index).to have_issue(issue)
end

#=> Bad
issue = Resource::Issue.fabricate_via_api! do |issue|
  issue.name = 'issue-name'
end

Project::Issues::Index.perform do |index|
  expect(index).to have_issue(issue)
  expect(page).to have_content(issue.name) #=> page content check is redundant as the issue was already validated in the line above.
end

Prefer `aggregate_failures` when there are back-to-back expectations

In cases where there must be multiple (back-to-back) expectations within a test case, it is preferable to use aggregate_failures.

This allows you to group a set of expectations and see all the failures altogether, rather than having the test being aborted on the first failure.

For example:

#=> Good
Page::Search::Results.perform do |search|
  search.switch_to_code

  aggregate_failures 'testing search results' do
    expect(search).to have_file_in_project(template[:file_name], project.name)
    expect(search).to have_file_with_content(template[:file_name], content[0..33])
  end
end

#=> Bad
Page::Search::Results.perform do |search|
  search.switch_to_code
  expect(search).to have_file_in_project(template[:file_name], project.name)
  expect(search).to have_file_with_content(template[:file_name], content[0..33])
end

Prefer to split tests across multiple files

Our framework includes a couple of parallelization mechanisms that work by executing spec files in parallel.

However, because tests are parallelized by spec file and not by test/example, we can't achieve greater parallelization if a new test is added to an existing file.

Nonetheless, there could be other reasons to add a new test to an existing file.

For example, if tests share state that is expensive to set up it might be more efficient to perform that setup once even if it means the tests that use the setup can't be parallelized.

In summary:

Do: Split tests across separate files, unless the tests share expensive setup.
Don't: Put new tests in an existing file without considering the impact on parallelization.

Limit the use of the UI in `before(:context)` and `after` hooks

Limit the use of before(:context) hooks to perform setup tasks with only API calls, non-UI operations, or basic UI operations such as login.

We use capybara-screenshot library to automatically save a screenshot on failure.

capybara-screenshot saves the screenshot in the RSpec's after hook. If there is a failure in before(:context), the after hook is not called and so the screenshot is not saved.

Given this fact, we should limit the use of before(:context) to only those operations where a screenshot is not needed.

Similarly, the after hook should only be used for non-UI operations. Any UI operations in after hook in a test file would execute before the after hook that takes the screenshot. This would result in moving the UI status away from the point of failure and so the screenshot would not be captured at the right moment.

Ensure tests do not leave the browser logged in

All tests expect to be able to log in at the start of the test.

For an example see: https://gitlab.com/gitlab-org/gitlab/-/issues/34736

Ideally, any actions performed in an after(:context) (or before(:context)) block would be performed via the API. But if it's necessary to do so via the UI (e.g., if API functionality doesn't exist), make sure to log out at the end of the block.

after(:all) do
  login unless Page::Main::Menu.perform(&:signed_in?)

  # Do something while logged in

  Page::Main::Menu.perform(&:sign_out)
end

Tag tests that require Administrator access

We don't run tests that require Administrator access against our Production environments.

When you add a new test that requires Administrator access, apply the RSpec metadata :requires_admin so that the test will not be included in the test suites executed against Production and other environments on which we don't want to run those tests.

Note: When running tests locally or configuring a pipeline, the environment variable QA_CAN_TEST_ADMIN_FEATURES can be set to false to skip tests that have the :requires_admin tag.

Prefer `Commit` resource over `ProjectPush`

In line with using the API, use a Commit resource whenever possible.

ProjectPush uses raw shell commands via the Git Command Line Interface (CLI) whereas the Commit resource makes an HTTP request.

# Using a commit resource
Resource::Commit.fabricate_via_api! do |commit|
  commit.commit_message = 'Initial commit'
  commit.add_files([
    {file_path: 'README.md', content: 'Hello, GitLab'}
  ])
end

# Using a ProjectPush
Resource::Repository::ProjectPush.fabricate! do |push|
  push.commit_message = 'Initial commit'
  push.file_name = 'README.md'
  push.file_content = 'Hello, GitLab'
end

NOTE: Note: A few exceptions for using a ProjectPush would be when your test calls for testing SSH integration or using the Git CLI.

Preferred method to blur elements

To blur an element, the preferred method is to click another element that does not alter the test state. If there's a mask that blocks the page elements, such as may occur with some dropdowns, use WebDriver's native mouse events to simulate a click event on the coordinates of an element. Use the following method: click_element_coordinates.

Avoid clicking the body for blurring elements such as inputs and dropdowns because it clicks the center of the viewport. This action can also unintentionally click other elements, altering the test state and causing it to fail.

# Clicking another element to blur an input
def add_issue_to_epic(issue_url)
  find_element(:issue_actions_split_button).find('button', text: 'Add an issue').click
  fill_element :add_issue_input, issue_url
  # Clicking the title blurs the input
  click_element :title
  click_element :add_issue_button
end

# Using native mouse click events in the case of a mask/overlay
click_element_coordinates(:title)

End-to-end testing Best Practices

Link a test to its test-case issue

Exceptions

Prefer API over UI

Avoid superfluous expectations

Prefer aggregate_failures when there are back-to-back expectations

Prefer to split tests across multiple files

Limit the use of the UI in before(:context) and after hooks

Ensure tests do not leave the browser logged in

Tag tests that require Administrator access

Prefer Commit resource over ProjectPush

Preferred method to blur elements

Prefer `aggregate_failures` when there are back-to-back expectations

Limit the use of the UI in `before(:context)` and `after` hooks

Prefer `Commit` resource over `ProjectPush`